Loading...
Description
Energy box, per 5 m cable length
The energy box with an input voltage of 400 V and a maximum current of 20 A is assembled ready for installation. It has the dimensions 102 x 105 x 27 mm (H x W x L) and is made of self-extinguishing plastic in accordance with UL 94 (FR). The material will stop burning as soon as the power distributor is disconnected from the ignition source. The enclosure is screwed and sealed to prevent unauthorised access. Assigned to protection class IP20, the box is not suitable for installation in damp rooms. The output voltage for the 4-pole connection of the power splitter is 400 V, for the two-pole connection for the normal connection it is 230 V. During installation, the total connected load of the cooker socket should also be taken into account so that it is not exceeded by the connected loads. If an induction hob with pre-assembled cables is used, the 4-pole plug of the energy box must be attached to these and reinserted.



Technical specifications:
— input voltage 400 V
— output voltage 4- pin (2-phase) 400 V
— output voltage 3- pin (1-phase) 230 V
— current max. 20 A
— tested according to IEC 60670-1 (DIN EN 60670-1), IEC 60670-22 (DIN EN 60670-22) and IEC 61535 (DIN EN 61535)
— material: self-extinguishing according to UL 94 (FR). In case of fire, after removal of the ignition source, this plastic will stop burning within a short time (self-extinguishing)
— construction: the housing is screwed and must not be opened by unauthorised persons
— dimensions of the box: 102 x 105 x 27 mm (H x W x L)
— protection type for the entire product IP20
— material: plastic

Calculation of the power requirement of the energy box:
— total power requirement of the cooker socket: 11 KW (with symmetrical distribution)
— hob power (4-pin connection): max. 7360 W (2-phase)
— oven power (3-pin connection): max. 3680 W (1-phase)

The use of a table socket to connect multiple consumers via a box coupling is not allowed for safety reasons.

If the induction hob already has a fixed cable, its use is compulsory. In this case, disconnect the 4-pin connector from the preassembled cable of the energy box and attach to the existing cable of the induction hob.



Article type:
Distributor
Colour:
black
Form:
angular
Height:
27 mm
Length:
102 mm
Length of the supply line (primary):
5.000 mm
Material:
plastic
Protection class:
IP20
Rated current:
20 A
Width:
105 mm

Accessories

Adapter cable, 10 m, 3 x 1,5 mm²
Product number: 7012053
  • Connecting materials

MAGAZINE

Little things make big differences

With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.



 

To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.

CATALOGUES & BROCHURES

There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!



Catalogue PDFs Online catalogue