Loading...
Description
E-Klima A/Z 150, waste and fresh air wall conduct
The COMPAIR® flow E-Klima A/Z 150 extract air/supply air wall box enables efficient regulation of extract air and supply air in the kitchen for a controlled exchange of stale and fresh air and a healthy indoor climate. In the COMPAIR® flow air duct system, the air flows quietly around the curve with minimal pressure loss thanks to guide bodies in transition pieces and horizontal bends. Due to the volume flow-controlled exhaust and supply air openings, the wall duct has optimum flow values. The two-part supply and return air wall box has separate return air and supply air elements that can be used directly next to each other or as individual elements. The supply air damper can only be opened in the event of negative pressure. On the supply air side, there is a grille diffuser with a mounting spigot for the round duct with a diameter of 150 mm. Since the wall duct is telescopic, the length of the duct can be adjusted from 490-690 mm depending on the wall thickness. A wall opening of approx. 155 mm is required for the installation of the pipe. To neatly conceal the wall opening, the stainless steel inner cover of the exhaust air element can be slid over the pipe. For optimum flow performance and protection against the weather, the telescopic wall box has two designer external louvres in a modern louvre look with internal backflow flaps. The external louvres are made of high-quality stainless steel and are characterised by a high level of robustness.



Two-piece wall conduct with separate exhaust and fresh air elements. The two stainless steel design external blinds in modern lamella look with internal back pressure shutters solve even spatially difficult installation situations. An internal stainless steel cover on the waste air element can be pushed over the plastic pipe and completely covers the wall penetration. On the supply side there is a grid outlet with a connector on the round pipe. Both elements can be used next to each other as a set, or as single elements. Optimum flow values are achieved through volume-flow controlled waste and fresh air openings.
The fresh air flap only opens with negative pressure.
When installed with an open-flue chimney, please coordinate this with the chimney sweep responsible.
— stainless steel external blind 190 x 190 mm per blind
— round waste air connection Ø 150 mm
— installation depth 490–690 mm
— wall penetration Ø ca. 155 mm per element



Article type:
Wall sleeve
Certification:
stainless
Colour:
stainless steel/white
Connection diameter:
150 mm
Form:
angular
Height:
190 mm
Installation depth:
490–690 mm
Material:
stainless steel
Mounting/Fixing:
installation in the wall
Note:
When installed with an open-flue chimney, please coordinate this with the chimney sweep responsible
Output drive:
round
System dimension:
150
Width:
190 mm

Downloads

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.

CATALOGUES & BROCHURES

There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!



Catalogue PDFs Online catalogue